Product details
Amazon basics steel jack stands – 3 tonne pair (black/red)
These Amazon Basics steel jack stands are a proper no-nonsense way to keep a raised car steady while you get on with underbody work. Each stand is rated at 2.7 tonnes (about 2,721.55 kg) and sold as a 3-tonne class product, so they’ll cope with most family cars, 4x4s and light vans — just worth double-checking your vehicle’s jacking points and axle loads before you start.
Key features
- The stands adjust from a minimum height of 263 millimetres to a maximum of 404 millimetres, making them handy for jobs from brakes and exhausts to oil and filter changes.
- A self-locking ratchet system lets you click each stand to the exact height and holds it securely — simple, reliable and quick to set up.
- The large U-shaped saddle gives a broad contact patch with the vehicle, while the wide square base helps stop any rocking or tipping while you’re underneath.
- Robust steel construction with a rust-resistant coating keeps them looking tidy and ready for outdoor use or a stint in the garage.
Specifications
Capacity: each stand 2.7 tonnes (2,721.55 kg). Heights: min 263 mm, max 404 mm. Item weight (pair): approx 5.7 kg. Colour: black frame with red accents. Model: SW-STJK03.
How to use and safety notes
Use a suitable floor jack (not included) to lift the vehicle, then lower it carefully onto the stands. Set each stand to roughly the same height before settling the car down, then use the self-locking ratchet to fine-tune and lock the position. Once the vehicle rests on the stands, give it a gentle nudge to check stability before climbing underneath. Don’t move the jack while the vehicle is supported on the stands.
Some practical tips: chock the wheels and apply the handbrake, use a piece of cardboard under the stand if you’re worried about scratching the floor, and wear gloves when handling them. Always use stands on firm, level ground. These stands are for support only — never rely on them as the sole lifting device.
Why choose these stands?
For routine maintenance or an emergency roadside job, these stands are sensible and straightforward. They’re compact enough to live in the boot, tough enough for regular garage use, and quick to set up without faffing about with complicated fittings. They won’t replace a professional lift, but for most home mechanics wanting safe, stable support they’re a solid, good-value choice.
Common questions
- Can these stands hold the whole car? They’re rated per stand at 2.7 tonnes — always check your vehicle’s weight distribution and use the correct number of supports.
- Are they weatherproof? The rust-resistant coating helps, but storing them somewhere dry will extend their life.
- What if the ratchet sticks? Keep the mechanism clean and free of grit; a light lubricant will usually sort it out.
Overall, these Amazon Basics jack stands are a practical, reliable pick for everyday car care — no fuss, just sturdy support and a bit of peace of mind when you’re working under the vehicle.