AUTOXBERT Jack stand pads (3 tonne) – Rubber slotted pinch-weld protectors, Black (Pair)

In stock

  • Heavy-duty rubber pads designed for 3 tonne jack stands and jacks.
  • Slotted design protects pinch-welds and frame rails from damage.
  • Anti-slip surface adds grip and stabilises the vehicle during lifting.
  • Prevents bending or crushing of the saddle and clamping points.
  • Compact pair included – simple to fit and store (10 × 7 × 3 cm each).

Product details

3 tonne car jack stand rubber pad – slotted pinch-weld protector, black

Give yourself a bit more confidence under the car with these rubber jack pads. Made for 3 tonne jacks and jack stands, they sit between the jack saddle and your vehicle’s frame or pinch-weld to improve grip and protect paintwork and metal from damage while you’re working.

Key features

  • Hard-wearing rubber construction provides cushioning and resists wear, so they’ll see you through plenty of lifts.
  • Slotted profile designed to locate on pinch-welds and frame rails, helping to avoid bending or crushing the clamp points.
  • Textured, anti-slip surface cuts down on movement and makes the car feel more secure while raised—handy on slightly uneven or greasy floors.
  • Compact and lightweight — easy to keep in the toolbox or chuck in the boot for roadside jobs.
  • Sold as a pair: two pads per pack so you can protect both sides during maintenance.

Technical details and compatibility

Manufactured from durable rubber, each pad measures approximately 10 × 7 × 3 cm and weighs around 60 g. Designed for use with 3 tonne (3T) jacks and jack stands. Model reference: Jack Stand Pad (12G061187).

Why they help

Jack up without a pad and you’ll often see paint chips, dents or bent pinch-welds afterwards. The rubber spreads the load and cushions contact points, protecting painted or coated suspension parts. The extra grip also means less faffing about trying to keep the jack steady — a proper bonus when it’s cold or the garage floor’s a bit oily.

How to use

Pop the pad into the jack saddle before you lift. Make sure it’s seated correctly on the pinch-weld or frame rail, then check the vehicle is stable on supports before getting underneath. They’re dead easy to fit and remove — no tools required. Note: always check your jack’s saddle size and condition first; these pads suit most standard 3T jacks but it’s sensible to confirm.

Practical notes

Pack contains two rubber jack stand pads. Small variations may occur due to manual measurement (about 0–1 mm) and monitor colour settings may slightly alter how the black appears on-screen. If you’re unsure about compatibility with an unusual jack saddle, check the dimensions or ask before use.

Simple, affordable and effective — these pads make working under the car a bit less stressful and help keep paintwork intact. Ideal for DIYers, home mechanics and anyone who prefers their car to stay looking tidy.

Additional information

Brand

AUTOXBERT

Size

10 × 7 × 3 cm

Material

Rubber

Load Capacity

3 tonne

Colour

Black

Back to Top
Product has been added to your cart
We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept