Product details
Daelesr da-001 2-pack jack pad adapters – rubber slotted protector, black
Handy little jack pad adapters for anyone who spends time under cars or does light garage jobs. They slip onto most jacks and axle stands to protect chassis rails and pinch welds from dents, scrapes and chipped paint. Simple to use and they cut out a lot of the faffing about when you want to lift the car in the right place.
what they are and why they help
These pads are moulded from heavy‑duty rubber that cushions pressure and grips the jacking point. The soft face stops metal‑on‑metal contact, so paintwork and seam seals aren’t ruined. The top has a deep V‑slot to cradle pinch welds or slotted frame rails, and the cross‑line pattern keeps the jack saddle from sliding off when you’re under load.
key features
- Heavy‑duty rubber construction with good cushioning – helps protect chassis paint and coatings while lifting.
- V‑shaped top slot holds a range of jacking points, with a maximum top slot width suitable for common pinch welds and rails.
- Cross‑line anti‑slip pattern on the face and an arc‑shaped bottom groove to reduce turning or slipping on the jack head.
- Compact size: 63 × 45 × 50 mm – easy to stash in the boot or toolbox.
- Pack of two pads – fits most jacks and axle stands for everyday car maintenance.
technical specifications
Brand: Daelesr – Model: DA‑001. Product dimensions approximately 63 × 45 × 50 mm, item weight around 260 g for the pair. Top V‑slot maximum width ~23–24 mm, depth ~18–23 mm depending on the point; bottom groove width about 29 mm and depth around 27 mm. Load‑bearing capacity typically quoted as 2–3 tonne – fine for standard passenger cars and many light vans, but always double‑check vehicle weight and the correct lifting points.
typical uses and tips
- Use when lifting a car for tyre changes, brake work or routine maintenance to protect paint and metalwork.
- Perfect for mechanics, DIYers and mobile technicians who want a quick, protective interface between jack and chassis.
- Check that the V‑slot fits your jack head before relying on it completely – some oversized or oddly shaped jack saddles might not sit perfectly.
- These pads help reduce damage but are not a replacement for proper axle stands or safe lifting procedures – always use suitable stands and follow safe working loads.
They won’t fit every single jack on the planet, but they’re compatible with most standard jacks and stands. If you’re unsure, measure your jack saddle against the V‑slot dimensions above. Overall, they’re a small, inexpensive addition that stops scratches, protects weld seams and makes lifting the car a bit less nerve‑wracking — no more fretting over chipped paint when you’re doing a quick repair, especially in winter.
Package includes two jack pad adapters in black. Suitable for general automotive, workshop and light construction use. If in any doubt about compatibility with specialised lifting equipment, check the jack manufacturer’s guidance first.