Product details
Dicn jack stands set of 4 – heavy duty 3 tonne, adjustable 29–43 cm
Need a reliable set of stands to keep the car steady while you work underneath? These DICN jack stands are built for everyday garage use and small workshop jobs. Each stand is rated to 3 tonne (3,000 kg), so they’ll cope with most cars, SUVs and light vans — a bit of reassurance when your hands are oily and patience is thin.
practical features that make a difference
They’re made from a mix of steel and cast iron with a rust-resistant finish, so they shrug off damp garage conditions better than plain metal. The ratchet offers nine height positions across a 29–43 cm range (around 11½–16¾ inches). The lifting saddle is about 14 cm and each stand weighs roughly 2.4 kg, meaning they’re sturdy without being a pain to move. The wide, splayed feet spread the load and are kinder to workshop floors — you’re less likely to get a wobble on slightly uneven ground.
- 3 tonne capacity per stand provides solid load-bearing for most maintenance tasks.
- Quick one-hand ratchet adjustment makes setting the height simple and fast — no faffing about.
- Wide base and four splayed supports improve stability when the vehicle is raised.
- Durable build with rust-resistant coating keeps them looking smart and working reliably.
- Set of four is handy for axle support, axle swaps, suspension work or whenever extra stability is needed.
typical uses and common questions
These stands are ideal for underbody repairs, brake or exhaust work, suspension jobs, wheel and tyre changes where you need extra support, or as a safe prop during longer projects. A common question is “Can they support a whole vehicle?” — remember they’re rated per stand, so use them in the correct pairs or sets and follow the vehicle maker’s guidance. Worried about rust? The coating helps, but storing them somewhere dry when not in use will keep them in tip-top condition for years.
technical specifications
- Capacity: 3 tonne (3,000 kg) per jack.
- Height range: 29–43 cm (approx. 11.4–16.9 inches) with 9-stage ratchet.
- Lifting area: 14 cm.
- Material: steel and cast iron with rust-resistant coating.
- Colour: blue with black stamping.
- Weight: approx. 2.4 kg per stand, package weight approx. 10 kg.
- Package: 4 x jack stands.
safety notes – a few sensible reminders
Always use the stands on level, solid ground and place them on the manufacturer-recommended lift points. Chock the wheels and never rely on a hydraulic jack alone — these stands should be the primary support while you’re under the vehicle. If you’re unsure about lifting points or load capacity, have a quick check in the vehicle handbook. Use them correctly and you’ll keep the job safe and stress-free — because no one wants surprises halfway through a job, especially when it’s cold and wet outside.
All told, these DICN jack stands are a sensible, no-nonsense addition to a home mechanic’s kit or a small workshop. Strong, adjustable and straightforward to use — they take the worry out of working beneath the car so you can get the job done properly.