Product details
Draper 30883 ratcheting axle stands – 6 tonne pair, 29mm x 107mm saddle
After a pair of axle stands that won’t faff about? The Draper 30883 ratcheting stands are proper kit for the home garage or a busy workshop. Each stand is rated to 6 tonnes (12 tonnes per pair), features a quick ratchet action for fast height setting and a generous U-shaped saddle to sit snugly under axles. That mix of strength and ease-of-use is just the ticket for brake jobs, suspension work or safely leaving a vehicle up on stands for a spell.
built for stability and safety
The extra-wide base gives a steadier footprint, so there’s less wobble when the car’s up in the air. The ratchet locks positively into place, making height adjustment quick and reliable – none of that faffing about with pins or fiddly grub screws. The bodies are finished to resist rust, handy for cold, damp garages where gear tends to take a bit of punishment over time.
practical details and specs
- Capacity: 6 tonne maximum per stand (safe working load), 12 tonne per pair.
- Height range: minimum 400 mm, maximum 630 mm, giving a lifting range of 230 mm between lowest and highest positions.
- Saddle size: 29 mm x 107 mm U-shaped cradle to suit a wide variety of axles and crossmembers.
- Item weight: approximately 15.9 kg for the pair – solid but still easy enough to move around the garage.
- Lift type: manual ratchet adjustment for simple, reliable operation.
where these stands help most
Ideal for DIYers and pro mechanics alike. Use them after jacking a car up when working on brakes, swapping out suspension bits or carrying out underbody checks. They’re also great for winter storage or long-term projects where the vehicle needs to be held off the ground. In short, they take the worry out of leaving a car supported so you can crack on with the job.
One thing to note: while the 29 mm x 107 mm U-shaped cradle suits most axles and crossmembers, it’s worth checking the vehicle’s contact points before lifting. Always jack the vehicle at the manufacturer’s recommended lift point and lower it carefully onto the stands, use pairs where required and place them on a level, solid surface — never rely on a single stand alone.
why choose these stands
- Heavy-duty capacity and wide base for proper peace of mind when the vehicle is elevated.
- Ratcheting action speeds setup and saves time spent under the car.
- Durable finish helps prevent rust after a season (or two) of use.
- Clear height range makes them versatile for many cars and light commercial jobs.
Put simply, the Draper 30883 axle stands are a no-nonsense pick for anyone who needs dependable, easy-to-use support in the garage. They won’t do the job for you, but they’ll keep the car steady while you get on with it — and that’s what really matters.