Product details
Hitowmfg 2-inch trailer hitch receiver extension — 2-inch rise/drop
If the back of your vehicle sits a touch high or low and your hitch-mounted kit keeps scraping or hanging at an odd angle, this extension could be just the ticket. It’s a sturdy, straightforward way to move the receiver 6 inches back and give you a 2-inch rise or drop so everything sits true. Ideal for fitting a bike rack, cargo carrier or other hitch-mounted kit without hacking up the bumper or losing precious ground clearance.
Key features
- Made for standard 2-inch square receiver tubes (Class III/IV), so it fits most cars, SUVs and vans without fuss.
- 6-inch (≈152 mm) extension with an adjustable 2-inch (≈51 mm) rise or drop — helps correct misalignment and adds useful ground clearance.
- Solid shank in heavy-duty steel, robot-welded for consistent strength and long service life.
- Tough black powder coat that holds up to rust, muck and the elements — handy on salted winter roads; works well with an anti-rattle kit to cut down noise.
- Three pin-hole positions to avoid the bumper or trim; accepts a 5/8-inch (≈16 mm) hitch pin (pin not included).
Fitment, capacity and common uses
This extension slides into any 2-inch receiver and adds 6 inches of reach while offering 2 inches of rise or drop. It’s rated for a 350 lb (≈159 kg) tongue weight — that’s the downward force your accessory can safely bear. Important: this unit is intended to position and support hitch-mounted accessories (bike racks, cargo carriers, etc.) and is not a standalone towing device. Always check the combined ratings of the vehicle, hitch, extension and accessory before carrying heavier loads.
Why choose this one?
It’s a proper no-nonsense solution when a bit of extra reach or a small height tweak will save the day. No messing about with bumper mods or buying a whole new hitch. The heavy steel build and powder-coated finish mean it’ll keep doing its job and looking tidy through wet weather and gritters-on nights. The extra pin positions are a simple but very practical touch, making it easier to get a neat fit with different bumpers and trims.
Quick notes and tips
- Always use a 5/8-inch hitch pin or locking pin (not included) rated for your setup.
- Check vehicle and hitch manufacturer limits — the extension adds length and a load moment, so make sure total tongue weight stays within safe bounds.
- If there’s any rattle, a small anti-rattle kit will tidy things up and keep things quiet on the road.
- Easy to fit: slide into the receiver, line up the preferred pin hole and secure. No special tools needed for basic fitting.
In short, this extension is a practical, hard-wearing accessory for anyone needing a bit more reach or a slight height adjustment for hitch-mounted kit. Strong, weather-resistant and simple to fit, it helps avoid scraping, awkward angles and poor fitment when carrying bikes, boxes or other kit on the back of your vehicle.