Product details
iBACheck 2098 breathalyzer – portable fuel cell tester (Black)
This is a neat, no-nonsense breathalyser for anyone who wants quick, repeatable readings without any faff. The iBACheck 2098 uses a 13×13mm fuel-cell electrochemical sensor — the sort of kit professionals trust for reliable results. It’s pocket-sized, rechargeable and gives voice prompts, so it’s dead easy to use even when your hands are full.
professional-grade sensor and accuracy
The fuel cell reacts specifically to ethanol, so readings are far more stable than the bargain-basement semiconductor units you see around. The device reports in multiple formats (mg/L, mg/100mL, %BAC, ‰BAC) and offers four conversion factors (2.0, 2.1, 2.2, 2.3) to suit different regional standards. Typical performance is a standard deviation of ±0.03 mg/L (around ±6%) with low drift — meaning it stays consistent over time.
easy to use – real life features
No complicated setup: charge via USB‑C, pop on a one‑way mouthpiece and blow when prompted. Automatic flow monitoring makes sure you give a valid sample, and the unit logs up to 1,000 readings with timestamps — handy for tracking checks across a night out or for workplace records. Voice prompts guide you through each step and the 1.5″ three‑colour display shows results clearly at a glance.
- Rechargeable on-board battery — roughly 200 tests per full charge (use a 5V/2A or higher charger for the quickest charge).
- Anti-cheat one-way mouthpieces included (6 supplied) — more hygienic and helps protect the sensor.
- Compact dimensions (128 × 50 × 24 mm) and lightweight for pocket carry.
- 1,000 memories with real-time clock timestamps — easy to review past results.
- Voice prompts in English, Chinese and Japanese — useful in noisy environments or for quick checks.
when and how to test – practical tips
Don’t test straight after drinking — residual mouth alcohol can give wildly inflated readings. Wait at least 10–15 minutes after your last drink, give your mouth a quick rinse with water and avoid smoking or eating beforehand. If you get a very high result, the sensor may take a minute or two to clear before the next test — that’s normal. Bear in mind breath alcohol can keep rising as alcohol is absorbed into the bloodstream, so peak readings might come 15–30 minutes (or longer) after drinking heavily.
what this device is good for
- Quick personal checks before driving or using machinery — gives a clear indication of breath alcohol concentration.
- Workplace spot checks and record-keeping — timestamped memories provide a useful trail.
- Clubs, events or parents checking youngsters — easy to use with hygienic one‑way mouthpieces.
If the battery’s completely flat, it’s best to give it at least 30 minutes on charge before expecting reliable operation. Also remember: the device estimates breath alcohol and converts that to a blood-alcohol equivalent using accepted ratios — it’s not a substitute for laboratory analysis or a legal breath test. Always check the legal drink‑drive limits where you are and treat results as a guide, not the final word.
technical summary
Sensor: 13×13mm electrochemical fuel cell – Display: 1.5″ 3‑colour LCD – Units: mg/L, mg/100mL, %BAC, ‰BAC – Conversion factors: 2.0 / 2.1 / 2.2 / 2.3 – Memories: 1,000 with time stamp – Mouthpieces: 6 one‑way included – Charging: USB‑C cable included – Dimensions: 128 × 50 × 24 mm – Weight: approx. 170 g.
Legal note: Results can vary with individual physiology and environmental conditions. The device provides a reliable indication of breath alcohol concentration but should not be used as sole evidence of legal intoxication. Read the user manual carefully and follow local laws and guidance when interpreting results.