Product details
Ibacheck portable breathalyser 2098S – rechargeable LCD (white)
Here’s a compact, no‑nonsense little breathalyser that does what most people want: a quick estimate of blood‑alcohol concentration, a rechargeable battery and a clear, easy‑to‑read display. It’s aimed at drivers, hosts or anyone wanting a fast check before getting behind the wheel. Simple to use and small enough to pop in a pocket or glovebox — no faffing about with complicated setups.
what it does
The 2098S uses a semiconductor sensor to detect alcohol in your breath. It has automatic flow detection so the unit knows when you’re blowing correctly, and an auto‑clean routine that helps clear residual oxide from around the sensor to keep readings steadier over time. Results appear on a three‑colour LCD; the unit beeps and shows a HI warning if levels exceed the preset alert.
quick practical notes
- Don’t test straight after drinking or smoking. Rinse your mouth and wait at least 10–15 minutes for a reliable result — mouth alcohol can cause short, sharp spikes.
- The device may display zero for very low readings (below roughly 0.08‰) to avoid false alarms from mouth or environmental odours.
- If you get a very high reading, leave the unit a few minutes between tests so the sensor chamber can clear and reheat — it needs a short breather to stabilise before the next reliable reading.
key features and benefits
- Rechargeable and economical: built‑in 3.7V Li‑ion battery with USB‑C charging; a full charge provides around 250 tests.
- Four measurement units: ‰ BAC, % BAC, mg/100mL and mg/l — pick the unit that matches local limits.
- On‑board memory: stores up to 200 records so you can track results without an app.
- Quick cycle time: about 25 seconds between tests and a steady five‑second breath sample requirement.
- Portable design: compact dimensions and multiple mouthpieces included for safe sharing.
technical specifications
- Detection range: 0.08–1.99 ‰ BAC (0.008–0.199 %BAC; 8–199 mg/100mL; 0.04–1.00 mg/l). Values below ~0.08‰ may display zero to prevent false alarms.
- Accuracy: ±0.016 %BAC (typical for semiconductor sensors).
- Memory: 200 records stored on the device.
- Display: three‑colour LCD with three decimal points.
- Battery & charging: 3.7V Li‑ion internal battery, USB‑C cable included; we recommend a 5V 2A charger if the battery is fully depleted.
- Accessories: 6 mouthpieces and USB‑C charge cable included.
- Dimensions: approx. 128 x 52 x 24 mm; device weight ~40 g (packaged weight approx. 130 g).
who it’s for and common uses
Perfect for someone who wants a quick check before setting off, hosts keeping an eye on guests at a party, or workplaces needing a basic screening tool. It’s handy for everyday peace of mind — just don’t treat it as a police‑grade instrument. In short: a sensible aide to help decide whether it’s safe to drive after a few drinks.
important cautions and legal note
Always wait the recommended time after drinking before testing. Semiconductor breathalysers are sensitive to residual mouth alcohol and readings settle over several minutes. This device provides an estimate only and is not suitable as legal evidence. Check local drink‑drive limits — results can vary with individual metabolism, medication or medical conditions. If in doubt, don’t drive.
If the battery is completely flat it may take a short while before it accepts a charge — worth checking battery condition first. Note that the default unit setting may reset if the battery is removed. For full instructions, calibration advice and troubleshooting, consult the user manual included with the product or available online.