Product details
Imaycc 2.5T car jack kit for Tesla Model Y/3/S/X – red
Practical and straightforward — this scissor jack kit is aimed squarely at Tesla owners who want a no-nonsense, reliable way to change a tyre. It’s compact enough to live in the boot but beefy enough to lift most Tesla models for an emergency wheel swap, without all the faff of complicated kit.
What’s included
- One 2.5T (2500 kg) scissor jack, made to sit on Tesla lift points.
- Two rubber jack pads that line up with most Tesla 25 mm locating holes, protecting the battery casing and pinch‑welds.
- Extended ratchet wrench for easier, single‑handed lifting.
- Lug wrench with a 21 mm drive head for wheel nuts.
Safety and compatibility
Safety first — the jack is constructed from high‑strength cold‑rolled steel and comes with an enlarged base for extra stability. The rubber pads prevent metal‑on‑metal contact and are shaped for the common 25 mm Tesla jack points. Important: this product is not compatible with the 2023 Model Y AWD 279mi (Austin build) and is not suitable for Tesla Model 3 Performance. If you’re unsure, have a quick look at your car’s jack points before you start.
How it helps you
Got a puncture at silly o’clock? This kit takes the sting out of a roadside wheel change. The extended ratchet means you don’t have to grunt your way up and down, the pads protect sensitive areas under the car, and you’ve got the essential tools to get back on your way without waiting for a recovery van.
How to use
- Park on level ground, apply the handbrake and chock the opposite wheel.
- Slot the rubber jack pad into the Tesla jack point, then set the scissor jack on its enlarged base.
- Use the ratchet wrench to raise the car until the wheel clears the road, then undo the wheel nuts with the lug wrench.
- Fit the replacement tyre, lower the car slowly and tighten the nuts to the correct torque — use the 21 mm drive head if needed.
Technical details and typical questions
Load capacity: 2.5 tonne (2500 kg). Lift range: 4.3″–15.3″ (approx. 110–389 mm). Item weight roughly 4.34 kg, compact for boot storage. Made from cold‑rolled steel with non‑slip rubber pads. While this jack fits most Model Y/3/S/X variants, please note the exclusions above — if a lift point looks different on your car, double‑check before use.
In short: a sturdy, easy‑to‑use scissor jack kit that protects your car while lifting and contains the basics for a quick, safe tyre change. A proper bit of kit to have in the boot — especially on a wet night when the last thing you want is extra faff.