Product details
Liekumm 1pc motorcycle ramp 180 x 25 cm – 300 kg aluminium folding ramp
Need a no-nonsense way to load a motorbike, e-bike or pushbike into a van without faffing about? The LIEKUMM folding ramp is a proper bit of kit for the job. It pairs lightweight aluminium with a sensible design so it’s easy to use, carry and store. It’s not flash, but it’s reliable and gets you where you need to be.
Key specifications
- The ramp unfolds to 180 x 25 x 4 cm and folds down to 90 x 25 x 15 cm for compact storage.
- Maximum rated load 300 kg (about 0.3 tonne); the ramp itself weighs roughly 6.4 kg — light enough to lift solo yet sturdy in use.
- Designed for a maximum usable height up to 52 cm (check your vehicle) and for tyre widths under 21.5 cm.
- Some versions quote an extended length of 222.5 cm and a maximum rise around 65 cm — if in doubt, measure your vehicle before use.
Practical benefits
The aluminium frame with welded hinges keeps the ramp strong while staying light enough to carry on your own. A textured anti-slip surface gives good grip even when it’s damp — proper handy on cold, wet mornings. Raised side edges of about 4 cm help stop tyres slipping off, and factory-fitted EVA pads on the top plate protect paintwork and keep the ramp steady against the vehicle lip.
Typical uses and scenarios
- Loading a dirt bike or motorbike into the back of a van for a weekend away.
- Moving an e-bike or heavy bicycle into a vehicle or garage for storage.
- Quickly loading garden kit like a tow-behind mower or small snowblower (use two ramps for four-wheel machines).
Safety and tips for use
- Always secure the ramp to the vehicle with the included safety strap before loading; ensure the strap is tight and the ramp doesn’t wobble.
- Confirm your vehicle’s lip/ground clearance is greater than 4 cm so the ramp sits correctly.
- Check the total rise and tyre width — the ramp suits rises up to around 52 cm and tyres under 21.5 cm. If you’re unsure, measure first.
- For ATVs, tractors, quad bikes or any four-wheel equipment, use two ramps (one per tyre pair) for stability.
- Where possible, get someone to spot you when loading heavier bikes, and take it steady — better safe than sorry.
What’s in the box
- One folding aluminium ramp with welded hinges.
- Safety strap for fastening the ramp to your vehicle.
- Factory-fitted EVA pads on the top plate and textured anti-slip film on the ramp surface.
All told, this ramp is spot on if you want a simple, robust and portable solution for loading single-wheel kit. It won’t replace heavy-duty industrial ramps, but for everyday use with bikes and light motorbikes it’s a dependable choice. If there’s any doubt about compatibility with a very tall vehicle or a wide-tyred machine, measure first — saves awkward surprises at the roadside.