Product details
MONZANA 171cm foldable heavy-duty loading ramps – 2-pack
These MONZANA folding ramps make loading bikes, quads, ride-on mowers and other small machines far less faff. Made from galvanised steel they shrug off the elements season after season, and the punched/perforated surface gives genuine grip even when it’s damp — a proper blessing over winter. They fold down neatly, have comfortable carry handles and a spring-locking mechanism, so you can move and store them without wrestling with awkward kit.
features
- Galvanised steel construction for strength and corrosion resistance — suitable for use in the garage or out in the garden.
- Perforated non-slip surface reduces wheel slip and lets water run straight through instead of pooling on the ramp.
- 200 kg load per ramp (400 kg for the pair) — ideal for motorcycles, mopeds, quads, ride-on mowers and similar light vehicles.
- Foldable design with spring-supported locking and a comfy carry handle — easy to transport and stow in a van or shed.
- Bevelled support ends give a firmer seat on a vehicle edge or van lip, helping to prevent the ramp slipping during use.
dimensions and technical details
The ramps extend to 171 x 23 x 4.5 cm including the support end (160 x 23 x 4.5 cm without). Folded size is approximately 95 x 23 x 9 cm. Weight is about 7.5 kg per ramp (roughly 15.9 kg for the pair). Each ramp carries up to 200 kg, giving a combined capacity of 400 kg for the pair. Material: galvanised steel. Colour: silver.
practical uses and tips
- Perfect for loading motorcycles, scooters, ATVs and lawn tractors into vans or onto trailers.
- Also handy on building sites for wheelbarrows and small machinery when a compact ramp is needed.
- Before you start, check your vehicle’s weight and wheel position against the ramp width and length — measure if you’re unsure.
- Ensure the bevelled ends sit securely on the vehicle edge; the perforations help tyres bite in, but try to avoid extremely steep angles where possible.
care and safety
A few simple checks and some basic care will keep these ramps going for years — wipe them down after use, store them somewhere dry and don’t leave them exposed to standing water or constant salt spray. The galvanised finish helps, but long-term exposure to salt or puddles will shorten their life. If any hinge or locking part gets stiff, a drop of lubricant will sort it out. And always keep fingers clear of folding points when opening or collapsing the ramps.
If you’re thinking of very heavy bikes or non-standard tyres, bear in mind these ramps are built for lighter vehicles up to 200 kg per ramp. For heavier motorcycles or unusual wheel setups, opt for heavier-duty ramps or check the manufacturer’s guidance first.
All told, these are straightforward, dependable ramps that take the headache out of loading light vehicles and equipment — compact, practical and built to last.