Product details
Mystatic large adjustable axle stand – support for caravans, lodges and campers
These Mystatic axle stands are for the jobs where stability really matters. Whether you’re setting up a static caravan or lodge, or working under a camper or van, a proper stand takes the worry away. Expect solid, secure support that’s easy to use and built to last — no fuss, just reliable performance.
Built tough for real world use
Constructed from galvanised steel and zinc-plated, these stands shrug off rust and cope with damp British weather without moaning. Full welds rather than spot-welds give a far sturdier build, and each stand is individually weight-stamped so you can check the rating at a glance. If you want extra reassurance, load test certification is available on request — handy when you’re working on site and need paperwork.
Practical, adjustable and easy to store
The height adjusts from 14.5″ to 18.5″ (36.8cm–47cm), making levelling and shimming straightforward. An 85mm jaw provides a secure cradle for axles and chassis sections, and the quick twist-lock action lets the stand collapse down for compact storage. No more faffing about lugging bulky bits to and from the garage.
- Use cases: levelling static caravans on hard stands, supporting lodges during site work, temporary support in workshops or garages, and stabilising camper or van axles when parked for maintenance.
- Practical benefit: cuts down movement and rocking when people are walking around inside a static caravan — that extra stability is a real bonus in winter.
- Safety note: these stands are intended for use on firm, level bases such as concrete or compacted hardcore. They are not a substitute for jacking from a vehicle’s manufacturer-recommended jacking points.
Technical details
Key specs are clear so you can match the stands to the task. The load rating is 6,000kg (6 tonne) per stand, the jaw width is 85mm, and the adjustable height range is 14.5″–18.5″ (36.8cm–47cm). Each unit is individually weight-stamped and zinc-plated for corrosion resistance. Manufacturer reference / part number: 02019-1.
- Height range: 14.5″–18.5″ (36.8cm–47cm)
- Jaw width: 85mm
- Load rating: 6,000kg (6 tonne)
- Finish: galvanised / zinc-plated
- Construction: full welds, not spot-welded
- Extras: load test certification available on request
If you’re wondering about very uneven ground: these are best used on a solid base. On softer sites, lay a decent timber pad or use a proper base plate under the stand to spread the load. For anyone doing regular maintenance or long-term siting, these stands give real confidence and cut down on worries about movement or sagging.
In short, a simple, robust axle stand that does the job without drama. If you need dependable support for caravans, lodges, vans or campers, these are well worth a look for their strength, corrosion resistance and ease of use.