Sealey AS10000 Axle Stands 10 Tonne Each (20 Tonne Pair)

Sealey AS10000 axle stands 10 tonne capacity per stand

These Sealey AS10000 axle stands are proper heavy‑duty kit — built to hold serious weight without any faff. Each stand is rated at 10 tonne, so a pair will support 20 tonne in total, which gives you real peace of mind working under vans, 4x4s or commercial chassis. Made from all‑steel and manufactured to rigorous safety standards, they’re the sort of solid, dependable kit you want under a vehicle.

Key features

• All‑steel construction for durability and long service life — ideal for both workshop and home use
• Full‑width crutch design provides a broad, stable support area under axles and diff housings
• Pin‑and‑chain load support gives a positive lock — no slipping once the pin is home
• Adjustable working height from 500mm up to 740mm to suit different vehicles and jobs
• Supplied in pairs so both sides of the vehicle can be supported safely at once

Technical specifications

• Model: AS10000 (Manufacturer part number AS10000)
• Capacity: 10 tonne per stand, 20 tonne per pair
• Minimum working height: 500 millimetres; maximum working height: 740 millimetres
• Product dimensions: 520 x 480 x 420 mm (approx.)
• Item weight: 38.8 kg for the pair

Practical uses and tips

• Perfect for lifting and safely supporting commercial vans, 4x4s and heavy trailers when used with a suitable jack
• Always use on a level, solid surface — concrete or tarmac is best; mud or soft ground is a no‑no
• Give the pins and chains a quick once‑over before each use; if anything looks worn, replace it
• These stands are for supporting the vehicle, not for lifting it — use a properly rated jack to raise the vehicle, then put the stands in place
• Handy in winter for underbody work or brake jobs — sturdy support makes the job quicker and safer

Some people ask about compatibility with particular jacking points — the full‑width crutch suits axles and differential housings best, but always check your vehicle manufacturer’s lift points first. These stands are straightforward and no‑nonsense: hefty enough to be rock‑steady, adjustable enough to be useful, and simple to use so there’s no messing about. Supplied in pairs and ready for the workshop, they’re a reliable bit of kit that puts your mind at rest when you’re working under heavier vehicles.