Product details
Sealey AS3O axle stands (pair) – 3 tonne per stand, orange
These Sealey axle stands are a proper bit of kit for anyone who needs reliable, long-term support under a vehicle without any fuss. Supplied as a heavy-duty pair, each stand is rated to 3 tonne — so together you’ve got a reassuring 6 tonne capacity. The bright orange finish is a small but handy touch, making them easy to spot when the garage gets a bit hectic.
solid, simple and safe
The frame is made from heavy-gauge steel with welded construction, so there’s real strength where it counts. Each stand uses a large crutch head to spread the load and reduce pressure on pinch points, and a captive multi-position pin gives a positive, secure support height. No fiddly cams or temperamental locks — just a pin that stays put.
where these stands come into their own
Whether it’s routine servicing, changing an exhaust, lowering a subframe or any job that needs a car safely off the floor, these axle stands do the job. The adjustable working height ranges from 290–435 mm, so they suit most everyday cars and light vans. That extra adjustment makes life simpler when jacking points aren’t exactly level on both sides.
- Capacity and confidence: 3 tonne per stand gives peace of mind for a wide range of vehicle tasks.
- Height range: 290–435 mm adjustable to match jacking height and ground clearance.
- Durable build: heavy-gauge steel and welded joints for long service life.
- Secure locking: captive multi-position pin prevents accidental drop.
- Workshop friendly: bright orange for visibility and large crutch heads for stable seating.
technical details and what to expect
Part number AS3O. Product dimensions are roughly 30 x 33 x 24 cm and the combined weight for the pair is about 5.7 kg. They’re supplied as a set of two and ready to use — no batteries, no mains, just plain, honest mechanics’ kit. Always support the vehicle with a suitable jack first and follow safe working practices.
If you’re worried about compatibility with specific jacking points, have a quick check of your vehicle manual — the large crutch design typically works well with most standard pinch welds and axle pads, but it’s worth confirming. All in all, these are straightforward, no-nonsense stands that do exactly what they’re meant to: provide stable, long-term support so you can get the job done safely. If you need particularly high-lift or very low-profile stands, double-check the height range to make sure they suit your job.