Product details
Sealey AS5000 axle stands — 5 tonne each, 10 tonne per pair
These Sealey AS5000 axle stands are a proper no-nonsense solution when you need a vehicle held securely off the ground. If you’ve been faffing about with flimsy supports, these feel like a reassuring upgrade — solid, straightforward and made for workshop use. Each stand is rated at 5 tonne, so a pair gives a combined 10 tonne capacity, which is more than enough for most light commercials and passenger cars when you want extra stability.
solid support and safety
The stands are all-steel with a full-width V-crutch (V-groove) to cradle axles or pinch welds safely. A simple pin-and-chain system locks the chosen height, so the stand won’t creep down under load — that really matters when you’re doing brakes, suspension or an oil change. They’re built to strict safety standards, so you can feel confident working under a raised car.
practical everyday use
Whether you’re changing tyres, sorting suspension or getting under the exhaust, these axle stands give a steady, predictable platform. The working height adjusts from 320mm to 500mm, covering low to mid-range lifts — no more balancing on dodgy bits of timber. They’re compact enough to stow in the garage and, at roughly 10.6 kg per pair, easy enough to carry around the workshop.
- Use case: raising one end of a van or car for brake or suspension work — pair the stands under the correct jacking points.
- Use case: longer-term projects where the vehicle will sit raised for a few days — the pin and chain give peace of mind against accidental drop.
- Tip: always lift with a suitable jack, then position the stands on a flat, solid surface and lower the vehicle carefully onto them — never rely on a jack alone.
what’s in the box and technical details
Sold as a pair, each stand has a minimum working height of 320 mm and a maximum working height of 500 mm. Product dimensions are approximately 438 x 310 x 280 mm and the pair weighs around 10.6 kg. Model number AS5000 — handy to check against service manuals or workshop inventories.
- Manufacturer: Sealey — model AS5000 (pair).
- Capacity: 5 tonne per stand, 10 tonne per pair.
- Working height: 320–500 mm.
- Head type: full-width V-crutch (V-groove) for secure axle support.
- Safety: pin-and-chain load restraint; heavy-duty steel construction.
Some might think these are overkill for small cars, but the added stability makes them feel safer, not awkward to handle. If you’re unsure about lift points on a particular vehicle, have a quick check of the handbook first. Otherwise, these axle stands are a straightforward, dependable bit of kit that takes the worry out of getting under a car.