Product details
Sealey vs2003 axle stands – 3 tonne per stand, ratchet type
After a dependable, no-nonsense pair of axle stands to keep your car, van or project vehicle secure while you work underneath? The Sealey VS2003 ratchet stands are made for both workshop and home-garage use — simple, strong and safe. They do exactly what axle stands should: hold the vehicle solid so you can crack on with the job without worrying.
Key features
These use a ratchet post with angled teeth so the more weight that’s on them, the tighter the post locks — clever, mechanical common sense that reduces the chance of accidental release. The support post is cast iron for proper strength, while the base is a welded steel plate for a stable footprint on concrete or tarmac. They’re sold in pairs and rated at 3 tonne per stand (6 tonne per pair), which covers the majority of routine maintenance and repair work.
Why they’re handy
If you can’t stand faffing about with unstable supports, these make life easier. They’re great for wheel-off jobs, brake work, suspension repairs or any situation where a reliable, height-adjustable support is needed. The working height is practical — from 275 millimetres up to 400 millimetres — so they suit small cars right up to mid-sized vehicles. Compact and relatively lightweight, they’re easy to tuck away when not in use.
Practical notes and safety
Always set them on a level, solid surface and place the stands at the manufacturer-recommended lift points on the vehicle — it sounds daunting but it’s straightforward. Give the ratchet teeth and base a quick visual check for damage before use, chock the wheels left on the ground, and never rely on a single stand on its own; use both as intended. If you’re using a jack to lift, lower the vehicle carefully and settle it onto the stands rather than leaving it balanced on the jack.
Specifications and dimensions
- Model: VS2003
- Capacity: 3 tonne per stand, 6 tonne per pair
- Minimum working height: 275 millimetres
- Maximum working height: 400 millimetres
- Overall dimensions (approx): 235 x 360 x 208 mm; weight ~6.9 kg per pair
Who should get these?
Ideal for home mechanics, hobbyists and small commercial workshops that want a solid, affordable pair of axle stands. If you’re getting under a car for brakes, exhaust or suspension work, these are a sensible, straightforward choice — sturdy, easy to use and not over-complicated. If you’re unsure about the height for a particular vehicle, measure the wheel arch and lift points first — better to be sure than be caught out.
They’re best suited to standard cars and light vans; for very large vehicles or serious off-road rigs you’ll want higher-capacity stands. For everyday garage jobs though, the Sealey VS2003s are a practical, durable addition to your toolkit that’ll save time and stop you worrying when you’re under the car.