Product details
Tiger Lock 5/8" black trailer hitch locking pin – fits Class III – V hitches
Need a robust, no-nonsense way to lock a trailer or accessory to your towbar? The Tiger Lock TL1562 5/8" locking hitch pin is exactly that — a one-piece solid steel pin with an anti-rattle design, so there’s less faffing about and far less clatter on the road. The extra-long active length makes it suitable for both 2" and 2.5" receivers commonly used on Class III, IV and V hitches.
Practical features that actually matter
The push-to-lock action keeps things swift once you’ve unlocked it, and the tubular keys are easy to handle even with cold hands or gloves. A watertight rubber dust cap stops moisture and grit getting into the lock — a proper bonus if the kit’s left outside in winter. Rubber O-rings keep the rattles at bay and let you tune the fit by removing or adding rings as needed. If you want extra peace of mind, there’s a separate spring clip included for a backup mechanical hold.
Why this one stands out
Unlike two-piece pins that can loosen or weaken over time, this is a single-piece, e-coated steel design built to last. The lock cylinder is chrome plated and the black e-coating gives decent weather resistance. Manufacturer test specs exceed 30,000 lbs shear, so it’s made to cope with the stresses of towing and heavy use. It also comes with a limited lifetime manufacturer warranty, which is handy to have.
- Fits 2" and 2.5" receivers — active length up to 3-1/8".
- 5/8" diameter pin, solid one-piece steel construction.
- Push-to-lock after opening; two tubular keys supplied, 1/4 turn operation.
- Rubber O-rings for anti-rattle; five O-rings included to adjust the fit.
- Includes spring clip (two clip holes for 2" and 2.5"), rubber dust cap and instructions.
- Shear test specifications exceed 30,000 lbs; limited lifetime manufacturer warranty.
Typical uses: securing a trailer ball, caravan parts, tow-mounted steps or a rigid bike carrier (note: this lock won’t fit bike racks with threaded connections). It will not fit receivers with 1/2" pin holes, so check your hitch dimensions before ordering to avoid any disappointment.
Quick checks before buying
- Measure your hitch pin hole — this product is for 5/8" (not 1/2" or threaded bike-rack pins).
- Confirm receiver type: works with 2" and 2.5" tubes (Class III, IV and V).
- If unsure about fit, measure the active pin length required — active length here is up to 3-1/8".
Not everything needs to be complicated. This hitch pin keeps things simple: secure, quiet and hard-wearing. If you’re in doubt about fitment, give your measurements a quick once-over or get in touch with the seller — no faffing, just a tidy, durable solution for everyday towing.