Product details
Vevor house floor jack post – 19″-36″ height, 18,000 lb capacity
If a sagging beam or a wonky joist has been keeping you up at night, this adjustable floor jack post makes temporary support dead simple and properly reliable. Designed for tradespeople, keen DIYers and anyone who needs a solid prop, it’s straightforward: put it where you need support, tweak the height, lock it off and crack on with the job.
what it is and who it helps
This is a telescopic jack post made from Q235 steel, adjustable from 19″ to 36″ (482–914 mm). It’s rated to 18,000 lb (roughly 8.16 tonnes), so it’ll handle heavier duties than your average jack post. Ideal for temporary shoring during renovations, easing up a sagging floor, supporting a patio beam while you fix things, or stabilising sections while new work cures. It’s not a permanent structural repair, but a tough stop-gap that saves time and worry.
key features and benefits
- Robust construction: Q235 steel body gives a great strength-to-weight ratio and stands up to proper jobsite use.
- Wide height range: 19″–36″ (482–914 mm) covers most common support needs without faffing about with extra bits.
- High load capacity: rated for 18,000 lb (about 8.16 tonnes) so it’ll cope with heavier beams and structures.
- Tool-free adjustment: turn the lever to raise or lower the post, then secure with the supplied lock pins — quick and painless.
- One-piece welded base plate: welded straight to the tube so there’s no fiddly assembly and the base sits flat and stable.
- Compact and portable: weighs around 7.17 kg, easy to shift around site or carry down to a cellar.
typical uses and scenarios
Reach for this jack post when you’re propping up a joist while replacing floorboards, holding a patio beam during repairs, temporarily supporting a lintel while doing brickwork, or bracing a structure during renovations. It’s especially handy in winter when hiring scaffolding is slow or pricey — a real bit of a lifesaver for short-term work.
practical notes and safety tips
Turn the adjustment lever slowly and keep the post steady while changing height to avoid sudden shifts that could mark floors or make things unstable. Two lock pins are supplied for added security — always use them. This product is for temporary support; for permanent structural changes, consult a structural engineer or building control. If you’re unsure about load distribution or placement, get professional advice first.
As for floor protection: a small pad of timber or rubber under the welded base will help protect delicate surfaces. And while the welded base cuts setup time, make sure the floor or ground is level and solid before applying heavy loads.
technical specifications
- Brand: VEVOR
- Model: House Floor Jack (item model number 204A-0080-00-00)
- Material: Q235 steel
- Height range: 19″–36″ (482–914 mm)
- Max load: 18,000 lb (approx. 8.16 tonne / 8164.66 kg)
- Weight: approx. 7.17 kg
- Base plate: one-piece welded
In short, if you need a quick, heavy-duty propping solution that’s simple to set up and dependable, this VEVOR adjustable floor jack post is a solid choice. It keeps things steady while repairs or alterations are underway, saves on faff and is built tough enough for tradespeople and serious DIY work.