Product details
WilTec caravan levelling ramps – 2-piece set, 3 tonne, 40/70/100 mm
If you’ve ever battled with a wonky pitch, these levelling ramps take most of the faff out of getting your caravan or camper straight. The two-piece WilTec set will take up to 3 tonne and gives three tidy height options, so you can level up on a sloping campsite or an uneven garage floor without breaking a sweat.
Built to handle the weight
Made from high-density polyethylene (HDPE), the ramps are tough, weather-resistant and easy to look after — rain, mud or a bit of grit won’t do them much harm. They’re strong without being awkwardly heavy: the pair weighs roughly 2.56 kg and each ramp measures about 56.9 x 20 x 12.9 cm, so they’re simple to lift and tuck away when not in use.
Three height settings – fine tuning made simple
The stepped design gives you 40 mm, 70 mm and 100 mm options. Drive up slowly to the step you need, leave the handbrake on and you’re done — no tools, no jigs, no messing. Perfect for anything from small campervans to larger motorhomes, trailers and caravans when a couple of centimetres makes all the difference to a comfy night’s kip.
Safer grip and secure placement
Both the top surface and the underside have anti-slip features — the top helps the tyre bite in wet conditions and the base reduces the chance of the ramp sliding on concrete or hard standing. That added grip makes getting in and out much less nerve-racking and helps when you’re pitching an awning or arranging camping furniture.
Practical everyday use
These ramps are a handy, travel-friendly option: lightweight, quick to hose down and easy to store under a motorhome locker or in the garage. Typical uses include levelling on a slope, evening out a caravan for cooking and sleeping, or stabilising a trailer while you’re loading up. In short, a simple solution for that awkward tilt that spoils an otherwise cracking trip.
- Supports up to 3 tonne – suitable for many campers and smaller motorhomes.
- Three-step heights: 40 mm, 70 mm, 100 mm – choose the exact level you need.
- Durable HDPE plastic – weatherproof and easy to clean.
- Anti-slip top and base – better tyre grip and non-slip placement.
- Compact and lightweight – easy to carry and store.
A few sensible notes before use
Have a quick check of your vehicle’s axle load and the condition of the tyres before use, and always place the ramp on firm ground. These ramps are designed for levelling and parking support — they are not lifting jacks or a replacement for mechanical lifting equipment. If you’re unsure about weight distribution or compatibility, consult the vehicle handbook first.
Manufacturer reference: 65108. Item weight: 2.56 kg. Dimensions per item: 56.9 x 20 x 12.9 cm. No fiddly bits or assembly — straightforward, effective levelling when you need it most.