Product details
Hydraulic gearbox jack for up to 500 kg
After a reliable transmission jack that gets the job done without faffing about? This WilTec hydraulic gearbox jack will lift up to 500 kg and strikes a good balance of power, control and manoeuvrability for home garages and small workshops. It’s not flashy — just a proper, practical bit of kit for lifting transmissions, fuel tanks and other hefty components into place with minimal fuss.
Key features
Handy, no-nonsense features that actually matter when you’re working under a car:
- 500 kg load capacity — covers most car and light commercial gearbox jobs.
- Adjustable height from 110–195 cm (1100–1950 mm) so you can reach the right working level without awkward stretching.
- Four-arm adjustable cradle (saddle) for secure support of a wide range of transmission shapes and sizes.
- Hydraulic foot pedal for quick lifts, plus a handwheel with automatic reset for fine lowering — no more slow, fiddly adjustments.
- 30 mm piston diameter for steady, reliable lifting action.
- Four solid-steel swivel castors for easy manoeuvring around tight workshop spaces; position it exactly where you need it.
Why this helps you
Swapping a gearbox or dropping a fuel tank can be one of those messy, awkward jobs. This jack takes away a lot of the hassle: it holds the weight safely while letting you make small height corrections without clambering underneath. That means less time wrestling parts and more time fixing things properly. No more propping components on wobbly blocks or asking someone to hold a heavy part in place.
Practical notes and specs
Some useful bits to bear in mind:
- Product weight around 27.4 kg — sturdy, yet still easy to move about.
- Assembled dimensions: approx. 90.5 x 90.5 x 118 cm — check you’ve got the storage and working room before you buy.
- Model / item number: 50795; manufacturer part number: 50795 (WilTec).
- Always operate within the 500 kg limit and support the vehicle securely on axle stands — this jack is for lifting and positioning, not for leaving a vehicle suspended.
- Keep the piston clean and use the foot pedal smoothly for best longevity; occasional hydraulic oil checks are a good idea.
Typical uses
- Removing or fitting vehicle transmissions without needing an extra pair of hands.
- Lowering and supporting fuel tanks for inspection or replacement.
- Supporting heavy transfer cases, differentials or drivetrain components during service work.
All told, the WilTec gearbox jack is a solid, no-nonsense bit of kit for busy hobbyists and small workshops. It’s tough enough for regular use, easy to move on its steel castors, and gives the fine control you need when lining up heavy parts. If you’re unsure whether it’ll suit a particular vehicle, check the part’s weight and the working height available — and when in doubt, get a second opinion from a trusted mechanic. Safety first, then the rest will follow.