Product details
WZTO axle stands — 3 tonne jack stands (pair) — 320–450 mm adjustable support
These WZTO axle stands are made to take the faff out of routine vehicle work. Whether you’re changing a tyre, sorting suspension or having a quick underbody check, the last thing you want is wobble or uncertainty. These stands give a proper, reassuringly solid platform: 3 tonne capacity each, robust steel build and a wide base that grips the floor. Simple, safe and reliable.
Key features
- 3 tonne rated capacity (6,600 lbs) — plenty for most cars, SUVs, pickups, caravans and light vans.
- Adjusts in four positions between 320 mm and 450 mm (approx. 12.6–17.7 in) to suit low and higher-clearance vehicles.
- V-groove notched saddle on the ratchet post to cradle chassis rails and axle edges securely.
- Pyramid-shaped base with triangular foot pads to increase contact area and help stop sinking on tarmac or concrete.
- Pin-type locking plus ratchet engagement for positive, visible security — less faffing, more confidence under the car.
Technical specs
Constructed from heavy-gauge steel with welded anti-sink pads on each leg, each stand supports up to 3 tonne. The ratchet post clicks into four height settings between 320 mm and 450 mm, and the saddle is shaped to suit common axle and chassis profiles. Supplied as a pair and includes one pair of gloves for handling.
Uses and typical scenarios
- Changing tyres at home — these stands give solid support so you’re not relying on the jack alone.
- Caravan or trailer levelling — stops annoying sway when loading or when parked on a pitch.
- Garage and workshop jobs — ideal for brakes, suspension, exhaust work and any task that needs safe access underneath.
- Also handy for light building tasks, such as supporting steps or floor joists temporarily where a stable prop is needed.
Practical tips and safety notes
Always use on a level, firm surface — tarmac or concrete is best. These stands are supports, not primary lifting devices: use a proper jack to raise the vehicle, then position the stands under suitable lift points and lower onto them slowly. The pin-lock plus ratchet gives double assurance, but it’s sensible to check seating and never work under a vehicle supported only by a jack. If you’re on soft ground, the welded anti-sink pads help, but put a broad board or similar under the feet to prevent sinking.
Why these stands make sense
They marry straightforward engineering with sensible safety features — a wide load area, a notched saddle that holds the chassis, and anti-sink pads under each leg. No bells and whistles, no faff — just dependable support so you can get on with the job, especially handy when it’s cold and you want to work quickly and safely.
Package contents: 2 x WZTO jack stands (3 tonne each), 1 pair of gloves. Manufacturer: WZTO. If in doubt about vehicle compatibility, check your vehicle’s lift points and clearance before use.